Is my incubator Forced air or still? (Chick-Cozy)

[La Ferme de Sarah]

I have the Chickcozy Incubator.

I see there are different temperature ranges for Forced air and Still air but I am wondering if my Chickcozy is forced air or still?
I am gathering it is forced air as it looks like at the top under lid is the fan?

I have set my temp now .5 higher than it was. to 101F.
Not sure if this will be a mistake but it seems if my Govee is correct its about a degree out. So Actual temp according to Govee is showing 100F.

Is a temp of 100F or 100.5F most of the time Ok? or is this too high in forced air?

Before I had Chickcozy set at 100.5F so my Govee sitting on one of the empty egg trays was reading around a degree lower so around 95.5F..

I was scared that maybe going lower than 95.5 is bad so put it up.
I have 8 eggs left of 24 - shipped eggs from SA to NSW. I think the first 2 days were too cold as I was only folllowing the Chickcozy ONLLY set at 99.5 so was probably actually 98.5F.

We are day 8 nearly 9 now and I have candled the 8 eggs and i see 8 little moving beings and veins
The egg trays were a little big so I have put tissues under and around them. Would this be dangerous in regards to airing of the egg, I Hope not. I thinking its keeping them a lot more stable with the egg trays move from side to side.
Thank you.

 

[cavemanrich]

Let me answer some of your questions.
With the fan running,, it is a Forced air incubator. Circulating air makes more uniform temperature in most areas of the incubator.
You candled, and see life
Let your temperature be at current setting.
The tissue under, and around should be removed in my opinion. You want your eggs freely turning. I am assuming your incubator has an automatic turner.

WISHING YOU BEST,,,,,,,,,,,,,,,,,,,,,and

 

[ChickenMullets]

I have the Chickcozy Incubator.

I see there are different temperature ranges for Forced air and Still air but I am wondering if my Chickcozy is forced air or still?
I am gathering it is forced air as it looks like at the top under lid is the fan?

I have set my temp now .5 higher than it was. to 101F.
Not sure if this will be a mistake but it seems if my Govee is correct its about a degree out. So Actual temp according to Govee is showing 100F.

Is a temp of 100F or 100.5F most of the time Ok? or is this too high in forced air?

Before I had Chickcozy set at 100.5F so my Govee sitting on one of the empty egg trays was reading around a degree lower so around 95.5F..

I was scared that maybe going lower than 95.5 is bad so put it up.
I have 8 eggs left of 24 - shipped eggs from SA to NSW. I think the first 2 days were too cold as I was only folllowing the Chickcozy ONLLY set at 99.5 so was probably actually 98.5F.

We are day 8 nearly 9 now and I have candled the 8 eggs and i see 8 little moving beings and veins
The egg trays were a little big so I have put tissues under and around them. Would this be dangerous in regards to airing of the egg, I Hope not. I thinking its keeping them a lot more stable with the egg trays move from side to side.
Thank you.

are you using silkie or bantam eggs? There is a seller on etsy who makes 3d printed turning trays for this chickcozy in different sizes for smaller eggs. Silkies, Seramas, quail.