Nurture Right 360 parts?

[Waskaie]

Hello Everyone..

I thought I would thoroughly clean my Nurture Right 360, so I took it completely apart, but in the process I lost a short black wire, with a clip on the end, which I believe is a temperature sensor, possibly humidity, but pretty sure it's temperature. Long story short, I may also need the PCB? computer board as well, though I think it still may be good.

I have found temp/humidity sensor on eBay, that look like they will work, but I'd rather buy a Nurture Right 360 brand replacement.

Is there any website, or other places to find aftermarket parts for these incubators?

Side note: I may also be in the market for a broken Nurture Right 360 incubator for parts if anyone has one...

Thanks so much!

 

[Waskaie]

Well, since this post I found a temperature that sensor that plugged right in and fixed my problem, although my humidity sensor is out too, but I bought a few on the internet that look like they may plug in and fix that too, but I won't know until it is shipped(10+ days~china). I really don't need the humidity reading, as it is back working now, just nice to see..

If someone else needs helps fixing their broken Nurture Right 360, I might be able to help you out, or if you want to sell a broken unit, I might be interested in buying it, depending on what is wrong with it.

 

[Smithjm27]

Can you share what part you ordered?

I bought a broken nr360 off of fb market place because I like to tinker. Figured out everything works but the temp sensor. Now o the hunt for a new one

 

[Faraday40]

@Waskaie
Just wondering if you had issues with your NR360 dropping temp dramatically when chicks begin to hatch. Mine works great until lockdown. I must increase temp to compensate but that only goes so far.

Once the chicks begin to hatch the humidity grows higher and I believe the electronics go wonky from it. Several times I hear the alarms go off in middle of night and see a temp of 96-97'F I reboot, temp begins to climb but alarms wake me again. This has happened the last 2 hatches. Sadly both hatches have severely suffered. (Only the early chicks got opportunity to hatch and 3-4 days later a few weak chicks emerged) Any advice?

 

[OzarkCountryGirl]

I'm needing a new fan for my NR360. After only one year, the fan on mine has stopped.

 

[Penny_royal]

Well, since this post I found a temperature that sensor that plugged right in and fixed my problem, although my humidity sensor is out too, but I bought a few on the internet that look like they may plug in and fix that too, but I won't know until it is shipped(10+ days~china). I really don't need the humidity reading, as it is back working now, just nice to see..

If someone else needs helps fixing their broken Nurture Right 360, I might be able to help you out, or if you want to sell a broken unit, I might be interested in buying it, depending on what is wrong with it.

My temp sensor isn’t working anymore and Id really like to fox it. Where did you get extra parts?