Outdoor Brooder

x2. It's too much heat. The towel is also a fire hazard with the lamp and blocks of ventilation. Just a brooder plate should be fine, though make sure it's functioning properly in lower temps as many have disclaimers saying they're optimal for use in 50F and above.

This is my outdoor brooder that sits in the run. Ventilation on all 4 sides and I use a heating pad for heat.

View attachment 4110021
 

Attachments

  • IMG_4639.png
    IMG_4639.png
    1.5 MB · Views: 0
  • IMG_4638.png
    IMG_4638.png
    1.1 MB · Views: 0
  • IMG_4636.png
    IMG_4636.png
    1.3 MB · Views: 0
  • IMG_4637.png
    IMG_4637.png
    1.6 MB · Views: 1
I think I’m going to remove the towel, and I’ve been checking temperature with a thermometer, heat lamp/brooder plate end reads 88-93 degrees and the other end reads about 61-65 degrees on the no heat part. I also purchased a 2nd brooder plate since this one seems a bit small and I’ll be ditching the heat lamp and just using the 2 plates. But I won’t get that till Friday.
 

Attachments

  • IMG_4640.jpeg
    IMG_4640.jpeg
    504.9 KB · Views: 1
  • IMG_4641.jpeg
    IMG_4641.jpeg
    334 KB · Views: 1
  • IMG_4642.jpeg
    IMG_4642.jpeg
    464 KB · Views: 1
  • IMG_4643.jpeg
    IMG_4643.jpeg
    426.2 KB · Views: 1
  • IMG_4639.png
    IMG_4639.png
    1.5 MB · Views: 1
  • IMG_4638.png
    IMG_4638.png
    1.1 MB · Views: 1

New posts New threads Active threads

Back
Top Bottom