I'm getting a chipper soon and have a bunch of larger wood chunks that have been drying for months - some of them around a year. I've read that wood chips need to be dried for a bit before becoming run bedding. However, if the wood has already sat for a long time like it would to become firewood, does it still need to be left to sit again after going through the chipper or can I use it right away?
I wouldn't be adding a ton of chips in all at once; a bit would go in my run in small amounts over time and get mixed in with a lot of other stuff (straw, hay, pine shavings, etc.) and I also want to put it down in a thin layer over predator skirts to stop them from being slippy in the rain. I've used pine mulch in both places in the past but it needs replacing about twice per year as it breaks down.
Also, how well protected do chips from fresh wood need to be while aging/drying? I have plenty of tarps that could keep rain off of a pile, but tarps would stop air flow so I'm not sure about those. Eventually I should have a space freed up that is mostly protected from rain, but it won't stay 100% dry in really bad storms with high wind. Would that be good enough for the drying process?
I wouldn't be adding a ton of chips in all at once; a bit would go in my run in small amounts over time and get mixed in with a lot of other stuff (straw, hay, pine shavings, etc.) and I also want to put it down in a thin layer over predator skirts to stop them from being slippy in the rain. I've used pine mulch in both places in the past but it needs replacing about twice per year as it breaks down.
Also, how well protected do chips from fresh wood need to be while aging/drying? I have plenty of tarps that could keep rain off of a pile, but tarps would stop air flow so I'm not sure about those. Eventually I should have a space freed up that is mostly protected from rain, but it won't stay 100% dry in really bad storms with high wind. Would that be good enough for the drying process?