My husband and I live in Northern Wisconsin. On the 26 acre property, there is a 150+ tree apple orchard, several large gardens where we grow pumpkins, gourds, veggies and more. In my spare time, I love to make pottery (I work full time). My husband is retired and is a beekeeper and loves wood working. From spring to late fall, we sell our goodies on our property and the biggest joy for us in doing so is meeting all of the fun people along the way. And fun people ALWAYS love chickens! After many years of leafing through chicken magazines and dreaming, I wanted 2020 to be THE year for MY chickens (little did I know that apparently everyone wanted it to be their year, too). I didn't want to be on the hunt for something on FB Marketplace or Craig's List, mainly because I didn't want to haul away someone else's stuff and then hope I get motivated enough to put it back together. So I dug into my little savings from my pottery sales and bought a real nice coop I could afford, I ordered my chickens, and well, the rest is a journey that I'll take while my grandmother - a chicken farmer - fills the heavens with laughter as she watches down on me.

Welcome to my coop!
Capture56.JPG

Built in Texas, shipped to Wisconsin ...
Sensing that this year was going to be a crazy year for want-to-be chickeneers, I ordered the coop in mid-January for an early April delivery. It was shipped by freight and took about 5 days to get from Roost & Root - located in Dripping Springs, Texas - to our place in Northern Wisconsin.
Capture2.JPG

I ordered the Round-Top Chicken Loft Coop. I added the optional water/feeder package as well as the "winterize" package. The total cost for this coop was $3,937.49.My coop kit came with detailed instructions - 52 pages - on how to assemble. Phone support is avail for any questions, and there are YouTube videos as well.
Coop dimensions: approx. 9' wide x 6' long x 7' high.
Chicken capacity: 10 standard sized chickens with free-range time.
Capture4.JPG

The kit came with all hardware necessary to assemble, including drill bits. All that was required to assemble the coop is a drill.
Capture.JPG

These are the parts of the coop once they were unpacked from the shipping carton.

But first things first ...
We needed to build the frame for the whole thing - including the chicken run - to sit on.
Capture5.JPG

Spring in Wisconsin has a hard time deciding when to actually start so we built
the frame in our garage. The 9' x 16' frame was built using treated 4 x 4s and
joined them together using lap joints.
Capture6.JPG

We covered the entire frame bottom with 3' wide 16
gauge hardware cloth - we extended it 2' beyond the
edge of the frame as a protective barrier against
predators. We stapled the hardware cloth to the
frame using heavy duty staples and a pneumatic
staple gun. We used heavy wire to join the 3' pieces
together, tying them every 6" or so along the length.

Capture7.JPG

We dug out a shallow area for the frame. Once the frame was built, we moved it from our garage to the final location. IT WAS HEAVY. VERY, VERY HEAVY. And VERY awkward to move. Once we had the frame moved to where we
wanted it, we had to flip it over so that the "top" would be the bottom."
IT TOO WAS HEAVY. VERY, VERY HEAVY. And VERY awkward to flip over.
If it would have been nicer outside, we would have built it "on site" and
it would have been much easier.
Capture8.JPG

Once in position, we filled the entire frame with dirt. We spent quite a bit of time pushing dirt and sand in through the hardware cloth to fill in the gaps
between the wire and the ground. We figured once the chickens were in
their new home, they'd do a lot more of the fill-in by scratching around.
The dirt floor will also be good for using the deep litter method.

Time to build the Coop
The coop took approx. 1.5 hours to put together. Pre-drilled holes made assembly very simple and straight forward - only a drill was needed to assemble. The coop is made from 100% cedar, untreated. The wire areas are made of heavy duty 16-gauge galvanized welded wire. Galvanized metal hardware for hinges, and locks.
Capture9.JPG

Before we moved the frame outside, we did a dry run on the main coop assembly.
Capture10.JPG

We put together the roof in the garageas it is fairly light and we could lift on top of the coop once the coop was
in place.
Capture11.JPG

Next, we moved the coop onto theframe and bolted it down. We installed the roof and the nest boxes. Those are on the right, above where the waterer would go. The roost area will be installed on the left.
Capture12.JPG

WHOO, HOO! It's done!
Last year, hubby and I assembled a portable saw mill. This was by far
the easier of the two projects and a lot of fun to put together.
Cost of our time spent
together:
$$Priceless$$

Now on to building the chicken run ...
Knowing that there would be times our chickens couldn't free-range, we needed to build a run. My first idea was a 10' run that was 4' high, with a top that flipped open so I could get in and clean - easy-peasey, right? Nope, even better. Hubby suggested building something that matched the design of the new coop and wow am I ever glad I let him take the reigns on this one ...
Capture13.JPG

We used rough cut cedar 2 x 4's and cut them down to 2 x 2's. We then framed up the "walls" and door opening, thus matching the
frame and design of the coop.
Capture15.JPG

Next, we added to the structural integrity by adding bracing/panels and covered them with hardware cloth that is stapled on the inside.
Capture14.JPG

In order to match the rounded top of the coop, hubby rounded the cedar roof braces and we set them in place. (The white panels you see are the "winter" panels that attach to the hardware cloth on the coop's backside. They can be easily removed.)
Capture16.JPG

Then we added 1 x 6 cedar fencing for a nice finish for the roof/siding.

Total cost for the run including wood hardware cloth, screws, staples,
and paint: $788.

"Coop! (There it is)": The inside
Capture17.JPG

The roost bar is on the left side. It is 50" from the floor of the coop and 9" from the wall. The jump bars are 28" from the floor - there are no ladders.
Capture22.JPG

Below the roost bar are poop boards. The poop boards are easily
cleaned by scraping or removing
the plastic panels and washing.
I simply push the shavings
and droppings to the floor where it
gets mixed in with dirt, leaves
and grass clippings by the chickens.
Underneath the roost area, the
chickens can just relax. They can
also access the run area from a little
chicken door.
Capture19.JPG

The self-feeders are made of PVC and hold about 10 lbs of feed each. The door above the feeders makes it so that you do not have to enter the coop to fill but I do anyway as it gives me an opportunity to check on other things.

Above the feeder, I've hung the poop-scraper and some dried lavender.
Capture36.JPG





Capture18.JPG

The nest boxes are adjacent to theroost - on the right side of the coop - with an appropriately egg-shaped
opening in case there's any confusion as to what should happen inside. The floor of the nest boxes is 40" inches from the floor. The jump bars are
28" from the floor.
Capture23.JPG
I've filled nest boxes with dried meadow grass. I'm a potter so I made a few ceramic eggs - mostly just because they are fun to look at until my chickens start laying.
Capture20.JPG

Under the nest box is the self-waterer. It holds about 8 gallons of water and is filled from outside the coop.The nipples are vertical. Knowing I had these types of nipples in my coop, I started my chicks off with them when they were in the brooder.

When it's time to winterize the coop, the waterer came with "no freeze" nipples made with a copper nipple and I will switch them out.
Capture21.JPG
An aquatic heater is inserted into the slot on the cover so the water does not freeze - also lessening the chance of a fire hazard.
Below is a picture of one of the "winter" nipples and the aquatic heater I will use.
Capture40.JPG

Inside the run and the outside of coop and run
Capture24.JPG

The door to fill the food containers. I do not use this door but it's very good for ventilation.
Capture29.JPG

Length of run is 10' with plenty of room for some old wood stumps, a low perch, an old ladder, a hanging bucket of grit, and another water station.
Capture25.JPG

I just love this wee chicken door! I close it atnight when the hens are on their roost. I've ordered an automatic chicken door so I don't have to get up so early to let them out into
the run.
Capture30.JPG

Coop and run from the back. I decided to use a colored stain to help protect the wood. As it's Cedar, it probably wasn't necessary but I'm not fond of weathered wood. The winters up here can be brutal and I wanted to protect the wood + I think it looks nice. I used Pittsburgh Paints All Weather Latex Stain. It took 1 gallon of red and 1/2 gallon of the grey.














Capture32.JPG

I've lined the outside edge of the coop and run with rocks we've found in our fields. While there is hardware cloth that extends out 2' around the coop, I thought a predator might have a tough time digging in the rocks, too. Plus, I think it looks nice.





















Capture31.JPG

Last year I made a bunch of concrete leaves. I decided to use them as an entrance into both the run and the coop. Picture above is going into the run. Picture below is looking out from the coop door onto the lawn.
Capture33.JPG
Capture57.JPG

The egg box doors from the outside.
Capture60.JPG

Looking forward to opening this one day to find some eggs!


Capture34.JPG

Knowing that the winter here in northern Wisconsin can be long, cold, and
snowy, I invested a little bit more and purchased the "winterize" package. This includes corrugated plastic panels that can cover every single one of the wire areas. The above picture shows three attached.

Below is a picture of the inside of the coop with the panels on. Sometimes, if I know it's going to rain hard/storm, I will strategically put on panels to keep the coop dry and to help keep blowing rain from the chickens.
Capture35.JPG
Capture38.JPG

This is the front door, top panel. It has three knobs that attach through the hardware cloth. They are turned 45 degrees where they lock into place.
Capture37.JPG
This is the front door, top panel attached (looking at it from the inside of the coop).

For living in a residential area, I think my chickens get a LOT of free range time - 6-8 hours a day. I can usually find them lounging underneath a pine tree behind their coop, or pecking at the gravel driveway for a dropped seed, or a lone bug. On the days when it's rainy, or we are not here, they do just fine in this coop. Especially if I throw an extra handful of cracked corn or meal worms in. I was very social with my chickens when I was raising them in the brooder. I had coffee in the a.m., and cocktails in the afternoons and I still do. Pancake, my Buff Orpington loves to sit on my lap for a pet. Oreo, my Barred Rock, might like a sip or two of my cocktail. Henrietta, my Barnevelder, is pretty dittzy but she's a sweetie. She's usually the last one in the coop because she's found something to pick at. Eggatha, my Splash Orpington, is quite vocal that she does not want to be touched but will tolerate sitting by my feet. They all look different, they each have their own personalities, and generally, they all get along. As I sit and watch them do their chicken things, I wonder why we can't all be more like chickens.

MVIMG_20200625_141633.jpg

My 12 Chickens: Black Jersey Giant ("Black Betty - except she is a he so his name is "Bob"); Easter Egger ("Mel"); Olive Egger ("Picholine"); Barnevelder ("Henrietta"); Austra White ("Sally"); Crested Cream Legbar ("Hen Solo"); Buff Orpington ("Pancake"); Lavender Orpington ("Lilac"); Splash Orpington ("Eggetha"); Rhode Island Red ("Scarlet"); Light Brahma ("Freebie"); Barred Rock ("Oreo")
  • Love
Reactions: PioneerChicks