Hey guys, just thought I'd share my idea on my DIY goat stall i did last weekend for my 2 nigerian doelings. It is an 8 x 6 stall, fit in the corner of my barn, with field fencing stapled to wood boards. Hopefully this will serve as an inspiration to anyone trying to create something similar( I sure wish i had a guide before i started mine, lol), or if not, just enjoy the pics
First thing i did was I mounted U channel brackets against the walls. I decided to do 3 of them. 2 x 4s of course

I then laid down 2 4x6 rubber stall mats for hoof protection(this also helped as a measurement guide)

(Didn't get too many pics documenting this process)After that I drilled a hole about 2" into the concrete, maybe 1/2" in diameter. Then I bolted a 4x4 bracket to the floor with a lock washer. Then I inserted the 4x4 into the bracket, took a little hammering with a rubber mallet, nice and snug.

I also bolted the 4x4 to an above rafter for extra security.


Did the same for the other 4x4

Starting to come together

Then I mounted the same U Channel brackets on the 4x4s and ran the 2x4s through the brackets




After that was complete then I secured the 2x4s into the brackets so they wouldn't just be resting

Field fencing was then stapled to the boards going across



Finally, I added the gate I had made earlier by stapling the fencing to a wood frame


Thanks for looking and hope you enjoyed!


First thing i did was I mounted U channel brackets against the walls. I decided to do 3 of them. 2 x 4s of course
I then laid down 2 4x6 rubber stall mats for hoof protection(this also helped as a measurement guide)
(Didn't get too many pics documenting this process)After that I drilled a hole about 2" into the concrete, maybe 1/2" in diameter. Then I bolted a 4x4 bracket to the floor with a lock washer. Then I inserted the 4x4 into the bracket, took a little hammering with a rubber mallet, nice and snug.
I also bolted the 4x4 to an above rafter for extra security.
Did the same for the other 4x4
Starting to come together
Then I mounted the same U Channel brackets on the 4x4s and ran the 2x4s through the brackets
After that was complete then I secured the 2x4s into the brackets so they wouldn't just be resting
Field fencing was then stapled to the boards going across
Finally, I added the gate I had made earlier by stapling the fencing to a wood frame
Thanks for looking and hope you enjoyed!
