Gearheads

[sdm111]

Been fighting with serpentine belt on DS1 Camaro.

Awwww comeon mud! Do a dual overhead timing belt then. Won't be that bad then ha

 

[sdm111]

I still got to get the fill plug loose on the rear end of the tundra. I've been reading up on chemicals and had an idea from the crc freeze spray. Since I have access to fire extinguishers I got ahold of a 10lb co2 extinguisher. My thinking is, if the freeze spray freezes bolts to break them loose I'll try with co2 (dry ice). Freeze it with 10lbs which is way more than a can of spray and it's free. Extinguisher is sitting on my back seat right now, just gotta try it

 

[pertnear09]

I still got to get the fill plug loose on the rear end of the tundra. I've been reading up on chemicals and had an idea from the crc freeze spray. Since I have access to fire extinguishers I got ahold of a 10lb co2 extinguisher. My thinking is, if the freeze spray freezes bolts to break them loose I'll try with co2 (dry ice). Freeze it with 10lbs which is way more than a can of spray and it's free. Extinguisher is sitting on my back seat right now, just gotta try it

Just something I read, haven't tried.
A sharp smack or two face-on the head of the plug with a small-ish hammer will make them much easier to loosen. It’s just enough to compress the seal ring a tiny bit more, and break the bond. Good luck

 

[azurbanclucker]

Impact.