A panel getting the hardware cloth put on for the outside. The HC is wrapped around to the sides and bottom of the frame and the edges won't be accessible to prying hands

Painting the end panels before puting them up was so much easier! Why didn't I think of that before?

Painting in process.

I put pre- painted 1x6 deck boards all around the bottom to help keep predators from prying at the wire there. I have changed the coated 1/2 inch chicken wire out to 1/2 inch hardware cloth that extends 18 inch out. This spring I plan to add a 2 foot extension from that and put crusher run stones all around about 3 inches deep and 3 foot wide to make a nice path and finish off the predator barrier.

A panel getting the hardware cloth put on for the outside. The HC is wrapped around to the sides and bottom of the frame and the edges won't be accessible to prying hands

1x2 in place at the top of panel. I put 1x2s all the way around each panel with plenty of screws to prevent a predator from pulling the hardware cloth out from the outside.

1/2 x 1/2 inch harware cloth run on the inside of each fence panel.

painted 1x2's to hold hardware cloth in place

A panel getting the hardware cloth put on for the outside. The HC is wrapped around to the sides and bottom of the frame and the edges won't be accessible to prying hands

chickwhispers
Nov 4, 2014

There are no comments to display.