painted 1x2's to hold hardware cloth in place
A panel getting the hardware cloth put on for the outside. The HC is wrapped around to the sides and bottom of the frame and the edges won't be accessible to prying hands
1x2 in place at the top of panel. I put 1x2s all the way around each panel with plenty of screws to prevent a predator from pulling the hardware cloth out from the outside.
1/2 x 1/2 inch harware cloth run on the inside of each fence panel.
painted 1x2's to hold hardware cloth in place
The center "opening" on the end will be a 36" door.
This is the extended 13 1/2 ft x 16 ft with a 1 1/2 foot connection space. The posts are set in place using metal post stakes.All of the frame is made with removeable panels to make any future modifications or removal easier. The whole run is made completley with screws and lag screws all predrilled.
This small run, 5 x13 1/2 ft, is original square footage with the "barn" . The original builder/owner used a stone foundation to keep predators from digging. He had hole in the foundation for posts and chicken wire. I have added a frame (and a roof.)
chickwhispers

painted 1x2's to hold hardware cloth in place

There are no comments to display.

Media information

Album
UPDATED : My coop for "A French Hen" - The Run
Added by
chickwhispers
Date added
View count
447
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top Bottom