Harris Farms Nurture Right 360 Incubator is AMAZING!

Ohhhhhh okay thanks for clarifying. Good contraption!
I’m not gonna to stress too much cause, like @CluckNDoodle said, there isn’t much hope for those guys.
Yeah, mine ended up not developing either.

The egg from my own flock on the opposite side (for a counter balance weight) developed and hatched just fine though. Once I figured out the special egg wasn't developing, I took the contraption out and set my flock egg down on it's side like the rest of the eggs. Day 10 or 11 I think it was...
 
Yeah, mine ended up not developing either.

The egg from my own flock on the opposite side (for a counter balance weight) developed and hatched just fine though. Once I figured out the special egg wasn't developing, I took the contraption out and set my flock egg down on it's side like the rest of the eggs. Day 10 or 11 I think it was...
Aw too bad. I have try - I have room and they cost too much!
 
Okay, thank you.
So, when I candle, if there’s development, can you tell me what criteria you use to either keep them upright or lay them down? Also, how many days should I give them before checking?

As long as you're washing your hands before handling and being careful, you can candle as often as you would like. When hand turning you're handling them anyway. I just finished a hatch where I candled every day and I had a 94% hatched rate, only 1 quitter. So if you're careful about cleaning your hands and give yourself a padded area (preferably right in front of the Incubator) so you don't have accidents. There really isn't any harm in candling more often.

As far as my criteria for when it's safe to lay them down, you're looking for the air cell to stabilize itself either reattaching or the chick will get large enough to maintain the air cell in the rounded end of the egg. Saddles can get pretty big when incubating on their sides. So far this hasn't caused many problems for me, even with the worst saddles, but for a successful hatch you really want the chick to rotate and pip in the correct direction whenever possible so you can avoid having to assist.
 
As long as you're washing your hands before handling and being careful, you can candle as often as you would like. When hand turning you're handling them anyway. I just finished a hatch where I candled every day and I had a 94% hatched rate, only 1 quitter. So if you're careful about cleaning your hands and give yourself a padded area (preferably right in front of the Incubator) so you don't have accidents. There really isn't any harm in candling more often.

As far as my criteria for when it's safe to lay them down, you're looking for the air cell to stabilize itself either reattaching or the chick will get large enough to maintain the air cell in the rounded end of the egg. Saddles can get pretty big when incubating on their sides. So far this hasn't caused many problems for me, even with the worst saddles, but for a successful hatch you really want the chick to rotate and pip in the correct direction whenever possible so you can avoid having to assist.
Okay that’s helpful!
Thank you for helping me.
 
I know the NR360 has a 22 egg incubation capacity, but I've been using mine as a hatcher.
I was able to place 26 eggs for hatching without a problem. What do you think is the absolute maximum capacity of large eggs (for hatching)? What was your maximum hatch with this incubator?

My Cooler-bator has about a 5doz capacity (and is full), so I've been moving the eggs over to the NR360 weekly for hatching. I clean it up in time to repeat the next week. I've been having fun hatching for for others. (quail, turkey, ducks, and chicks) My issue is next weekend's group has 32 eggs getting ready for lockdown. As a test, I placed 32 misc. fridge eggs of about the same size into the NR360 and was able to close lid. However, I'm very concerned about the chicks not being able to "push" out if eggs are crammed so tightly together. I don't think it's possible for the eggs to move. Should I set up an overflow incubator?????
 
View attachment 1688630
I know with Spring right around the corner, and chick fever setting in there are a lot of people out there looking to purchase their first incubator, or maybe you're still looking for that incubator with a better hatch rate that doesn't cost you an arm and a leg, so I wanted to share my experience!

I did a lot of research before purchasing an incubator and there are good and bad reviews for even the most expensive incubators out there so taking my budget into account and what I wanted from my incubator I am SO happy with the results I got from my new Harris Farms Nurture Right 360! If you do your own research on the incubator most of the bad reviews you will find are on a couple of design flaws in the older models where the holes covering the fan were too large and it needed a cover on the digital readout to prevent it from shorting out from the high humidity at hatch time. In the newer models, these issues have been resolved but if you get an older incubator you can email the company and they will send you the appropriate parts to fix it.

View attachment 1688764
So back to the PROS of this incubator, at least for me!
- It comes with an automatic turner! I found that the most reasonable incubators often require manual egg turning and if you purchase the accompanying auto turner you find yourself around the same price as this incubator or more.
- It also has an egg candler built-in to the top of the incubator. It worked well for the sake of testing it but I will admit that I didn't use it much because I prefer my little high lumen flashlight.
- The visibility all the way around the incubator was a HUGE selling point for me! I could say it was for my daughter to be able to learn from the experience but if I'm being really honest, I most definitely spent the most hours sitting in front of the incubator in awe as the chicks hatched. lol
- The temperature and humidity stayed stable throughout the entire incubation process as long as you add distilled water daily. :thumbsup
- You add water from outside of the incubator so you don't disturb the temp and humidity.
- The company calibrated the thermometer and hygrometer well and I didn't have to go through the headache of trying to adjust it myself.
- This is thanks to the visibility as well but I was able to clearly see that all of the chicks hatched with zero issues. The eggs zipped cleanly and chicks were healthy! Yes, some of this is from genetics but it makes a big difference when the temp and humidity stay stable for the chicks ease of hatching.
- Because I was incubating different breeds my smaller eggs hatched earlier and I didn't want to leave the chicks in too long. Since the larger eggs hadn't pipped yet I took the risk of quickly opening the incubator and removing the hatched chicks. While I don't recommend doing that, what I was pleasantly surprised to find is that the humidity returned to normal in seconds and the rest of the chicks hatched without issue.

View attachment 1688718
CONS
- The top is a bit cumbersome to open and close but once you get used to it it's not so bad. I have also seen where someone used the adhesive plastic hooks and attached them to the sides upside down so that it was easier to hook their fingers under and open.
- The incubator holds 22 eggs but I feel like it would be very cramped in there if all of the eggs are viable at the time of hatch. I had quite a few infertile eggs because they were the first eggs of the season (8 infertile eggs to be exact) and 2 were quitters early in embryo development (it's impossible for me to know if the 2 quitters were due to the incubator or something else but I feel with my experience that it's less likely to be related to the incubator). All but one of the developed chicks hatched successfully and I candled right before lockdown and didn't feel good about that egg prior to closing the lid. It was also a poopy egg that I was hatching for a friend, I typically only use clean eggs as the bacteria can enter the porous shell and may have been responsible for the late embryo death. So my first run with the incubator gave me approximately 80% hatch rate (not including the infertile eggs). I anticipate having an even better hatch when I'm pickier about the eggs I set to begin with. - I'll update this later.

View attachment 1688773

***I promise all of these pictures were taken through the plastic. I did not open the incubator to take pictures. lol

For anyone that reads this far through the thread I would assume you're actually interested in the incubator. So the best tip I have is that I used a condiment bottle to add the water and I left the vent open all the way through the entire incubation because I felt the ventilation was important and it didn't effect my ability to keep the humidity where I wanted it.
View attachment 1688789

So my experience was great! I'd love to hear about your experiences with the Nurture Right 360!
I'll be participating in the Easter Hatch-A-Long with the same incubator so I will update my opinion if it changes. :jumpy
I love mine!
 
I know the NR360 has a 22 egg incubation capacity, but I've been using mine as a hatcher.
I was able to place 26 eggs for hatching without a problem. What do you think is the absolute maximum capacity of large eggs (for hatching)? What was your maximum hatch with this incubator?

My Cooler-bator has about a 5doz capacity (and is full), so I've been moving the eggs over to the NR360 weekly for hatching. I clean it up in time to repeat the next week. I've been having fun hatching for for others. (quail, turkey, ducks, and chicks) My issue is next weekend's group has 32 eggs getting ready for lockdown. As a test, I placed 32 misc. fridge eggs of about the same size into the NR360 and was able to close lid. However, I'm very concerned about the chicks not being able to "push" out if eggs are crammed so tightly together. I don't think it's possible for the eggs to move. Should I set up an overflow incubator?????

I would definitely set up an overflow Incubator. They need to be able to push out.
 
20210601_163052.jpg

Got my first hatch! 2 days early. 4 others have pipped but I haven't seen much extra going on. I had to take it out of the incubator to band it's leg and save it's eggshell (I'm planning on sending off the eggshells of this color to a lab to get sexed so I can tell which I want to keep, I only want a max of 2 more turkey hens in my flock and if I keep them until I can visually sex them I get too attached lol) and also because it was wrecking havoc on the other eggs. Hoping the brief moment of being open (Like, 30 seconds max if that) doesn't do anything to the eggs. Humidity & temp went back up super fast after I closed up.
 

New posts New threads Active threads

Back
Top Bottom