- Thread starter
- #21
what I was going to do for the coop is the same design as the run with the 7' wall down to 5' over the 6' width. Then I was going to go up 5' around the whole coop with plywood. (I will try to draw it up. So then the other spots from the 5' and above on the 3 walls would be HWC for ventilation. The front would be all wood.I wouldn't cut the angle too sharp, you want as much space as possible where the rafter meets the wall for soffit ventilation..with a good 18" of overhand beyond wall, then add a fascia to help block the wind.