So I've been working on this design here and there and thought I'd share and see what you all think. Havn't started building and don't have anyplace to put it, just something to pass the time that I might beable to use someday. I'm just bird crazy.
This would be a breeder pen for a quad of Cots or could probably also work for a trio of bobs.
Over all dementions are 16" tall 18"deep and 32" long with an added 3" in the front for the feeder and roll out catch tray.
The "false floor" is 10" from the top in the back and 12" from top in the front. Door is 8"x8".
The feeder I modeled after a new flat fronted rabbit feeder design I saw, and would put a rabbit water bottle on the other side of the door.
Also this would be made to accept a galv. dropping pan.
All walls would be 1"x1/2" WW, False Floor would be 1/2" hardware cloth as well as the catch tray which would also be lined with carpet padding.
There would also be a section where the feeder meets the front wall that would be 1"x1" WW to let the birds put their head through to eat but not get in the feeder.
That section is 3"h x 6"L. This design could be used to make a multi section system.
Just a concept, any questions/suggestions are welcome. It's late and I can't think anymore so goodnight BYC.
This would be a breeder pen for a quad of Cots or could probably also work for a trio of bobs.
Over all dementions are 16" tall 18"deep and 32" long with an added 3" in the front for the feeder and roll out catch tray.
The "false floor" is 10" from the top in the back and 12" from top in the front. Door is 8"x8".
The feeder I modeled after a new flat fronted rabbit feeder design I saw, and would put a rabbit water bottle on the other side of the door.
Also this would be made to accept a galv. dropping pan.
All walls would be 1"x1/2" WW, False Floor would be 1/2" hardware cloth as well as the catch tray which would also be lined with carpet padding.
There would also be a section where the feeder meets the front wall that would be 1"x1" WW to let the birds put their head through to eat but not get in the feeder.
That section is 3"h x 6"L. This design could be used to make a multi section system.
Just a concept, any questions/suggestions are welcome. It's late and I can't think anymore so goodnight BYC.