3-D printing

[Patiocoturnix]

Yeah, that’s what I was thinking. I think we have one somewhere. I have to find it and install it after this next three hour print.

Something like this. https://a.co/d/49xO961

 

[Ilovemychicks08]

Id agree in getting a standby system.

Even with a generator on our old house when power did go out it didnt start quick enough to save the print. So a standby system works.

 

[azurbanclucker]

OK, so the netpune 4 max does not have built-in wifi. So, to connect it to your PC, you will need a small ethernet switch and a couple of cables. HOW specifically depends on how your internet is configured and whether or not your router is providing DHCP (most do but it really depends)

If you're seeing power blips, you want the printer, your router, AND your PC plugged into a UPS.

 

[jnicholes]

OK, so the netpune 4 max does not have built-in wifi. So, to connect it to your PC, you will need a small ethernet switch and a couple of cables. HOW specifically depends on how your internet is configured and whether or not your router is providing DHCP (most do but it really depends)

If you're seeing power blips, you want the printer, your router, AND your PC plugged into a UPS.

I know it came with a small antenna, and I think that’s how it connects to Wi-Fi. I actually tested it and was able to connect it to my phone hotspot. The problem is, I cannot connect it to my house Wi-Fi because some of the symbols used in my password are not on the Neptune 4 Max keyboard for some reason. The dollar symbol, for example, is not there.

I don’t understand it either.